gototop
PT. Mulia Solusindo Office

PT. Mulia Solusindo Office

PT. Mulia Solusindo is the right choice to solve the problem of mechanical - hydraulic governor and speed control

More...
Christensen Plug Valve

Christensen Plug Valve

  New Delivery Concept For Quality Valves On The Global Gas And Oil Market At The Shortest Delivery Time

More...
Woodward Governors

Woodward Governors

  Our governors are used worldwide to provide reliable and precise control of speed and output in power generation, marine,…

More...
Yokogawa Wireless Products

Yokogawa Wireless Products

PT. Mulia Solusindo, we are Certified by DISPERINDAG as Yokogawa Sole Agent in Kalimantan

More...
Frontpage Slideshow | Copyright © 2006-2011 JoomlaWorks Ltd.

UG - Universal Governors

E-mail Print PDF

Woodward

 

Woodward UG-25+

 

The Woodward UG-25+ governor is a microprocessor-controlled, mechanicalhydraulic amplified, governor for controlling
diesel, gas, and dual fuel engines, and steam turbines.
Enhanced control capabilities, such as start fuel and boost limiting schemes, are an integral part of the UG-25+ governor. The
additional transient fuel limiting (jump-rate) improves the engine load acceptance and reduces transient emissions significantly.


UG-8

 

This fast-acting, high-work-output governor has no need for any auxiliary devices such as a start booster or oil cooler. Two work output
versions are available.
The UG-25+ offers speed control with software-selectable speed set points, dynamics, fuel limiting, and start behavior. All it takes is a PC to adjust and download configuration data.
Front panel and external speed settings make synchronization and load sharing easy for generator applications. A 4 mA to 20 mA speed setting is available for variable speed applications.
Adjustable droop permits load division and balancing among parallel operated prime movers. Droop can be set with a knob on the front panel between 0–10. The load limiter knob allows you to limit the governor output manually.
The UG-25+ uses a 1034 kPa (150 psi) internal operating pressure with an internal oil pump driven from the governor's drive shaft, available in either a keyed or serrated configuration. Oil pressure is maintained by a relief valve system with a drain to an internal oil sump.


download product Manual pdf

E-mail Print PDF

Woodward

 

Woodward UG-8

UG Governors (generally known as the “UG-8”) are available in either a UG Dial or UG Lever configuration. Each model is available with any of three different work outputs: 7.1, 13.2, and 15.9 Nm (5.2, 9.7, and 11.7 lb-ft).
The UG-5.7 and UG-8 use 827 kPa (120 psi) operating pressure. The UG-5.7 unit has a reduced area servo piston which produces a quicker response to load
changes and reduces overshoots at start up and on major load changes.

UG-8

The UG-10 uses a 1034 kPa (150 psi) internal operating pressure to produce the higher work output.
Dashpot pressure compensation provides governor stability and allows the UG governor to operate in isochronous rather than droop. Droop is available to permit load sharing. A needle valve provides optimum adjustment that exactly matches the governor with a particular engine's dynamics.
The UG governor has an internal oil pump driven from the governor's drive shaft. An arrangement of check valves permits the governor to operate in either direction. Oil pressure is maintained by a relief valve-accumulator system with a drain to an internal oil sump.

download product Manual pdf

E-mail Print PDF

Woodward

 

Woodward UG-40

 

UG-40 governors are used for speed or load control of larger dual fuel, diesel, or gas engines or steam turbines with governor drive speeds of 350 to 1050 or 550 to 1300 rpm.
Governors with lever speed setting are primarily used for propulsion engines. Dial or motor speed setting is primarily used for powergeneration installations.


UG-8

 

All UG-40 governors have adjustable compensation. A pointer on the governor sets and indicates the amount of compensation.
Compensation allows isochronous speed control. Compensation is temporary. A needle valve sets the speed at which compensation is removed from the governor
speed setting. Special damped ballheads and spring-driven drives are available for engines with rough governor drives.
Droop is available in UG-40 Governors to allow load sharing between multiple engines or power generation against an infinite bus.
UG-40s have internal, self-contained oil supplies. The governors provide 38° of output shaft travel. Recommended usable rotation is 2/3 of the maximum, or 25°.


download product Manual pdf

E-mail Print PDF

Woodward

 

Woodward UG-MAS

The UG MAS (UG with milliamp speed setting) controls the speed or power of prime movers used for propulsion, locomotives, pumps, and compressors.

The UG MAS speed-setting governor is a generic module. It can be used on most engines with a UG drive.
The UG MAS consists of a standard UG Dial governor equipped with a special cover assembly and a separate electronic driver box.

UG-MAS

download product Manual pdf

E-mail Print PDF

Woodward

 

Woodward UG8-PL

UG Governors (generally known as the “UG-8”) are available in either a UG Dial or UG Lever configuration. Each model is available with any of three different work outputs: 7.1, 13.2, and 15.9 Nm (5.2, 9.7, and 11.7 lb-ft).
The UG-5.7 and UG-8 use 827 kPa (120 psi) operating pressure. The UG-5.7 unit has a reduced area servo piston which produces a quicker response to load
changes and reduces overshoots at start up and on major load changes.

UG-8

The UG-10 uses a 1034 kPa (150 psi) internal operating pressure to produce the higher work output.
Dashpot pressure compensation provides governor stability and allows the UG governor to operate in isochronous rather than droop. Droop is available to permit load sharing. A needle valve provides optimum adjustment that exactly matches the governor with a particular engine's dynamics.
The UG governor has an internal oil pump driven from the governor's drive shaft. An arrangement of check valves permits the governor to operate in either direction. Oil pressure is maintained by a relief valve-accumulator system with a drain to an internal oil sump.

download product Manual pdf

Woodward Products

  • ms_prod_006.png
  • ms_prod_007.png
  • ms_prod_005.png
  • ms_prod_009.png
  • ms_prod_011.png
  • ms_prod_008.png
  • ms_prod_004.png
  • ms_prod_002.png
  • ms_prod_003.png
  • ms_prod_010.png

Yokogawa Products

  • prod_pr300.png
  • prod_zr22g.png
  • prod_rotamass3.png
  • prod_av550a.png
  • prod_gc1000.png
  • prod_ypv220.png
  • prod_dx100p.png
  • prod_yta220.png
  • prod_ejx210.png
  • prod_ejx910.png